Sturdy mounting for the motorcycle
- firm grip
- easy to adjust
- easy to release
- The smallest bracket can hardly be attached
Jorin
21 August 2021
Automatic translation off Dutch
Our choice for a universal phone mount for on a motorcycle
According to our Phone mount expert
Safely place your phone on your motorcycle with the RAM Mounts U-Bolt Phone Mount Motorcycle Handlebar Small. You can easily click your phone in and out of the x-shaped clip. Place your phone horizontally or vertically in the mount. The X-Grip fits around smaller devices between 47.6 and 82.5mm, like the iPhone SE, iPhone 12, and Samsung Galaxy A20e. Is your device wider than 82mm? Choose the large RAM Mounts. That way, the rubber corners sit tighter around your device. Pull the hinges apart to easily adjust the width, and place your device. The mount then locks around your device again. The rubber ends ensure your device won't slide easily. You can easily place this mount on the handlebar of your motorcycle with the U-shaped screw. With the U-Bolt, your mount stays on the handlebar extra firmly. This is because it's also locked on the bottom. You can tilt the hinge in an angle that you like while you ride. Thanks to the anti-slip sticker on your handlebar, the mount stays firmly in place, even with vibrations. You can still easily operate the screen of your phone with this mount.
Phone mount placement | Handlebars | |
Phone mount attachment method | Drive screws | |
Attachment method phone | Clamp | |
Charging function |
5 stars
18
4 stars
12
3 stars
3
2 stars
1
1 star
0
Jorin
21 August 2021
Automatic translation off Dutch
Erik
20 October 2022
Automatic translation off Dutch
Jet
26 May 2021
Automatic translation off Dutch
Joop
10 August 2021
Automatic translation off Dutch
Rutger
13 March 2022
Automatic translation off Dutch
Ralph Stoop
31 May 2021
Automatic translation off Dutch
Kevin
27 June 2021
Automatic translation off Dutch
ESTER KLUITMAN
14 June 2022
Automatic translation off Dutch
Tom van Klinken
16 September 2021
Automatic translation off Dutch
Michelle de Groot
2 July 2021
Automatic translation off Dutch
The clamps have a firm grip on the phone so that it will never come loose. I don't even need the attached rubber for this. Mounting the base on the handlebars was not without problems. Comes with 2 brackets to choose from, one thinner and one wider. I started with the thinner one, but the ball on which you attach the mechanism is so close to the screw thread that you cannot tighten the nut with a socket wrench. Finally used the wider bracket and I had just enough space in between to do this. The mechanism is easy to screw on and off, so you can easily attach it before your ride and remove it after your ride (this is also very nice because of theft).
Jorin
21 August 2021
Automatic translation off Dutch
see above + and -
Erik
20 October 2022
Automatic translation off Dutch
Sits firmly attached to my handlebars, no looking back while driving.
Jet
26 May 2021
Automatic translation off Dutch
Current product
Handlebars
Handlebars
Drive screws
Drive screws
Clamp
Clamp
No
No
Product number | 873520 | |
Manufacturer code | RAM-B-149Z-UN7 | |
Brand | Ram Mounts | |
Warranty | 2 years | |
Processing of your defect | Via Coolblue |
Holder for vehicle | Motor | |
Universal application | ||
Made for brand | Apple, Huawei, Motorola, Nokia, OPPO, OnePlus, Samsung, Xiaomi | |
Suitable for model | Apple iPhone 11, Apple iPhone 11 Pro, Apple iPhone 11 Pro Max, Apple iPhone 12, Apple iPhone 12 Mini, Apple iPhone 12 Pro, Apple iPhone 12 Pro Max, Apple iPhone 13, Apple iPhone 13 Mini, Apple iPhone 13 Pro, Apple iPhone 13 Pro Max, Apple iPhone 14, Apple iPhone SE, Apple iPhone SE (2nd generation), Apple iPhone SE 2, Apple iPhone X, Apple iPhone Xr, Apple iPhone Xs, Apple iPhone Xs Max, Huawei Mate 10 Lite, Huawei Mate 10 PRO, Huawei Mate 20 Pro, OnePlus 9 Pro, Oppo A53s, Samsung Galaxy A51, Samsung Galaxy A52, Samsung Galaxy A72, Samsung Galaxy Note 10, Samsung Galaxy Note 10 Plus, Samsung Galaxy Note 20, Samsung Galaxy Note 20 Ultra, Samsung Galaxy S20, Samsung Galaxy S20 FE, Samsung Galaxy S20 Plus, Samsung Galaxy S20 Ultra, Samsung Galaxy S21, Samsung Galaxy S21 Plus, Samsung Galaxy S21 Ultra, Samsung Galaxy Z Fold2 5G | |
Mount for product width | 47,6 - 82,5 mm | |
Product fits in holder with case |
Phone mount placement | Handlebars | |
Phone mount attachment method | Drive screws | |
Attachment method phone | Clamp | |
MagSafe magnet | ||
Mounting complexity | Very simple |
Charging function |
Water-resistant | ||
Color | Black | |
Material | Metal, Plastic | |
Metal type | Aluminum | |
Ball joint |
Tiltable | ||
Opening for charging cable | ||
Phone can be operated in holder | ||
Phone easily removable | ||
Anti-theft protection |