Corsair Obsidian 450D Window

Corsair Obsidian 450D Window is no longer available

Never available again

View alternatives in the sidebar

Similar computer cases

CORSAIR FRAME 4000D RS ARGB Black
  • ATX, E-ATX, Micro-ATX, and Mini-ITX
  • Mid-tower
  • Without fan controller
119,-

Delivered tomorrow


CORSAIR FRAME 4000D RS ARGB White
  • ATX, E-ATX, Micro-ATX, and Mini-ITX
  • Mid-tower
  • Without fan controller
105,-

Delivered tomorrow

View all Computer casings

Product information

Pros and cons

According to our computer case expert

  • Sufficient locks (7) for expansion.
  • Supplied including 3 fans of 120/140 mm.
  • Space for video cards up to 430 mm.
  • The housing has no sound-absorbing materials.
  • This housing is not equipped with a fan control.

Description

The Corsair Obsidian 450D Window is a computer housing that gives your system a look. The housing has a window in the side panel of the housing. The Midi Tower housing is suitable for ATX, Micro-ATX and Mini-ITX motherboards and has space for multiple video cards up to a length of 430 mm. Side panels, SSDs, expansion slots and optical drives are all tool-less to confirm. So you do not need tools to install these parts. The Corsair Obsidian 450D has 3 fans of 120 and 140 mm, but has room for no less than 8 fans with a maximum size of 140 mm. There is also room for 5 hard disks and 2 optical drives.

This is what you get

  • Manual
  • Accessories

Key specs

Form factor (IT casing)

Midi tower

Form factor (motherboards)

ATX, E-ATX, MicroATX, Mini-ITX

Maximum length video card

430 mm

Expansion slots

7

Dust filter

Show all specifications

Similar and better products

Show full comparison

Suitable accessories

Reviews

Rating

  • 5 stars

    10

  • 4 stars

    7

  • 3 stars

    0

  • 2 stars

    0

  • 1 star

    0

Customer images

Most helpful reviews

8,8/10 ()

Perfect case for an orderly and cool system

  • Appearance
  • Lots of space, also for water cooling
  • Good performances
  • Front is magnet for fingerprints
I'm coming from a Corsair Carbide 300r and it was starting to run a little too small for my system especially for water cooling purposes. I had been given an H100i in this case, but the bottom of it was sitting against the memory. With a view to expansion, I went for a larger case. The case had to have many options for water cooling, a window and good airflow. The Obsidian 750d also appealed to me, but the closed front was a downside for me and this case is more expensive. The NZXT H440 also appealed to me, but I read experiences with overheating in this case, so I went for the Obsidian 450d. Packaging The case was packed well, but the front was hanging loose in the box. This comes loose with a click system and during shipment it will have come loose. Fortunately nothing was damaged. Appearance I think the case looks very good and sleek. The perforated front may not appeal to everyone, but it certainly improves airflow. This front is equipped with a dust filter. As already mentioned, it comes loose via a click system. The front does come off very easily in my opinion and the system could have been a bit firmer. The top and bottom both have a magnetic dust filter. Every housing manufacturer should do this, because removing dust is much easier this way. I'm not a fan of the gray fans that come with it. The color doesn't match the front very well and I think black fans would have been better. The case comes standard with 2 x 140mm fans in the front and 1 x 120mm in the back. The front is made of brushed aluminum. This looks very good, but it is a magnet for fingerprints that are difficult to get off. Interior For a "normal" system with no more than 3 graphics cards and a motherboard of standard ATX size, the case is large enough on the inside. There is also room for radiators for water cooling: 240/280/360 mm above, 240 mm below, 120 mm at the rear and 240/280 mm at the front. The top radiator should not be too thick, otherwise it will touch the motherboard. If you want to install a radiator at the front, you have to remove the hard disk cage. This is done with 2 screws. SSDs can be installed behind the motherboard (2 pieces), so this is no problem for people with only SSDs. There's also plenty of room to hide cables, even with a non-modular power supply like mine. Performance The case keeps my system (with an overclocked AMD FX8320 and MSI GTX760) very cool. The fans are also quiet even at maximum speed and they move a lot of air. I don't have any problems with resonating parts or anything like that. The build quality is excellent. Soon I will be expanding my system with custom water cooling, but I don't think I will have any problems then.
  • Cedric Mellemans

  • 14 June 2014

  • Automatically translated from Nederlands

9,2/10 ()

good one

  • front panel gets of by pressing and has a dust roster in it
  • 3 fans installed that isnt as loud as i expected
  • the usb is long enough but the rest of it is to short imo
i just bought it because it was kinda retro and new looking and got cd bays. kbmm was not my best but i didn't had much space because of the panel it self but i don't see it when the panel is on, inside kbmm was ok but the fan wires and the other wires i couldn't do that the wires were just to short for that
  • killian kuyer

  • 19 June 2019

  • Automatically translated from Nederlands

9,6/10 ()

Powerhouse in a tight package

  • firm
  • Cool
  • window
  • Hard drive tray not so sturdy
This case is very solidly built, despite the many cutouts for cable management. The large cutout on the back of the CPU makes it easy to install or replace a cooler without removing the motherboard from the case. In contrast to the solidity of the other elements, the tray of the hard disks is slightly less sturdy (this is to say something negative about this topper.) The supplied fans are very good and already provide very good cooling. I have hung an LED strip in it myself so that you can see the components well. In combination with the large window, this was a super decision. Another big plus is that all intakes are equipped with fan filters so that you do not get dust on your precious components. This is by far the most beautiful system I've ever built. Are you a PC enthusiast and would you like to have a good-looking system in addition to sufficient space? Then this case is ideal.
  • rob Hofman

  • 14 May 2014

  • Automatically translated from Nederlands

Specifications

Product

Product number

451911

Manufacturer code

CC-9011049-WW

Brand

Corsair

Warranty

2 years

Processing of your defect

Carry-in warranty

General properties

Form factor (IT casing)

Midi tower

Form factor (motherboards)

ATX, E-ATX, MicroATX, Mini-ITX

Panel door

Cable management

White noise reduction

Dust filter

Physical properties

Width

21 cm

Depth

49,4 cm

Height

49,7 cm

Weight

7 kg

Color

Black

Power connector location

Top

Material

Metal

Fan properties

Fan controller

Cooling properties

Maximum height CPU cooler

165 mm

Internal connectors

2.5-inch Bays (HDD)

2

3.5-inch Bays (HDD)

3

5.25-inch Bays

2

Maximum length video card

430 mm

Expansion slots

7

Front panel connectors

Headphone jack

Microphone connector

Jos is eating a cookie