How do you get your JURA S8 ready for use?

In the video, you'll see how to get the coffee machine ready for use step by step. It'll take about 10 minutes of your time. We'll go through these steps with you:

• Step 1: turn on the machine
• Step 2: adjust the water hardness
• Step 3: set the water filter
• Step 4: rinse the machine

Necessities:

• Coffee beans
• Water hardness test strip
• Water filter
• Container with 1L capacity

1: fill the bean reservoir with coffee beans. 2: insert the plug in the socket. 3: turn the machine on with the button at the top of the device. 4: scroll on the touchscreen with your finger until the right language appears. 5: confirm your choice by pressing 'speichern', the top right button.

1: test the water hardness with the included test strip. 2: dip the test strip in a glass of water for 2 seconds. 3. wait for 1 minute until the red bars appear on the test strip. 4: indicate the right water hardness on the machine. Move your finger left or right for this until the number of red bars matches the number on your test strip. 5: confirm your choice with 'save'.

1: next, set the water filter. 2: assemble the 2 separate parts of the water filter. 3: remove the water tank from the machine. 4: place the water filter in the water tank and click it in place at the top. 5: fill the water tank up to 'max' and place it back in the machine. 6: place a container of at least 1L below the hot water spout. 7: the machine starts rinsing automatically. 8: the rinsing stops automatically and the machine will start to heat up. 9: remove the container. 10: your JURA S8 is now ready for use.